GibbsCam 2010 9.5.1 Multilingual (x32/x64) + Contents - Lz0..

GibbsCam 2010 9.5.1 Multilingual (x32/x64) + Contents - Lz0 | ~4.0 GB[/

GibbsCAM is a system for automated preparation of programs for CNC machine tools, combining readiness of use and functional strength. The basic functionality of the hypothesis can be expanded by the addition of specialized modules. Intuitive user interface provides quiet access to the functions of geometry management tool paths>, verification and postrpotsessirovaniem. Flexible programming techniques grant you to quickly create the optimum treatment program. The smooth processing be possible to be saved and used again, using the knowledge base. Modeling functions to give a lift prepare the geometry for the needs of processing through the cosmos of frame, surface and solid geometry. Built-in simulation of stuff removal accurately reflects the whole process of treatment, showing a time change of the geometry of the workpiece, and all possible conflicts. The end of calculation can be compared with the original geometry of the model, revealing the remnants of the material or badly. Full associativity between geometry, process parameters and trajectories can quickly modify the model and the processing parameters and automatically retain the corrected trajectory. The system is certified for use with Windows 7, Windows Vista (SP1 or SP2), Windows XP (SP2 or SP3), Windows Server 2008 or 2003. System requirements: * CPU: Intel Pentium 4 or newer. Including CPUs: Celeron (at in the smallest degree 1.7Ghz), Xeon, Pentium M, Core, Core 2, and Core i5/i7. AMD Athlon 64 or later. Including processors: Sempron 64, Turion 64, Phenom. * RAM 1 GB or other thing * VideoCard 128 MB or more * At least 500 MB of emancipate disk space for software Supports the following types of machines: * Milling by simultaneous control of 2 - 5 axes; * CNC single-and double-spindle, with at least some number of slides, with a programmable servo-machinery (tailstocks, lunettes, catcher details); * Turning and Milling single-and double-shaft, with at least some number of slides, with a programmable servo-machinery, with simultaneous control of 2 - 5 axis milling; * Multitasking turning and milling machines with multi-channel management without limiting the number of control channels, including the self-moving longitudinal turning (the so-called swiss-type machines); * Erosion of the pair-and chetyrehosevye. Milling * Stripping the plane of the billet; * Rough and contour 2-axis machining of prismatic components; * Rough 3-axis machining; * Finish 3 -, 4 - and 5-line of symmetry machining using a dozen different schemes of the tool; * Multipass 4 - and 5-line of revolution machining; * Drilling material for roughing; * Center the drilling, sealing washer, boring, deployment of holes; * Cutting taps; * Thread-; * Engraving adhering the plane and the surface; * Processing of 3-axis machines through one rotational axis; * Implementation of programmable measurement machine tools; * Use restrictions put ~ the depth of processing, as well as the exclusion zone Asked processing or restrictions; * All is not selected instead of processing faces are monitoring the faces, which can not kill; * When processing meeting automatically costs the whole outfit. The following types of tools: * End milling; * End mills with rounded edges and not rounded, ball end mills, tapered and straight; * Formed cutters (radius, "dovetail", fungal, ball); * Formed cutters, whose contours are drawn by the programmer; * Tools processing holes - the alignment, drill bits, countersinks, reamers, boring; * Taps; * Single and multiple tenor cutters; * Standard and drawn by the programmer mandrel. Turning * Treatment of prior and posterior ends; * Roughing and contouring the outer and inner contours; * Rough and profile boring internal circuits; * Roughing and contouring the outer and inner grooves; * Cut operations; * Center the drilling, sealing washer, boring, deployment of holes; * Cutting taps; * Turning the external and inner threads; * The transfer of parts of the spindle in the axis without limiting the number of such transfers; * Use any number of slides; * Management tailstock, lunettes, catcher mind supply systems blanks; * Consideration of ammunition, including different for different spindles. The following types of tools: * A tool by a diamond-shaped plates, rectangular, square, round, hexagonal, triangular, threaded; * Cutters through shaped plates, whose contours are drawn in by the programmer; * Tools processing holes - the alignment, train bits, countersinks, reamers, boring; * Taps. Additionally there is the possibility of the following milling operations: * Treatment through the correct orientation of components relative to the axis C; * Treatment through continuous rotation of the workpiece axis C; * "Winding" flat processing, including the engraving without interrupti~ the cylinder; * Use different types of interpolation for milling. Additionally there is the possibility of the following service operations: * Synchronization of operations carried out simultaneously at their beginning or end with the possibility of standby instruments to each other near the part or the disqualification of her opposite synchronized at the extremity or the beginning of the operation; * Progressive synchronization simultaneously in individual part of turning operations with a clear indication of the mass of mutual translation tools along parts; * Automatically checks for various kinds of synchronization corrigenda, such as an attempt to simultaneously run on one piece of meander and milling operations, or use one tool for processing two manifold parts simultaneously; * Automatic adjustment of the cutting performed simultaneously on the same parts turning operations. EDM * 2-axis machining closed and open circuits; * 2-central line machining of contours with a bias; * Treatment with the creation of jumpers and out of them; * Full burning material inside the contour; * Creating a single performance of vertical and inclined parts of matrices blanking dies; * 4-arbor machining closed and open circuits; * Manage supply and drainage, cutting conditions; * Allow the machine to the limit allowable angles of wire; * Allow shape of cutting technology. Treatment of surface and solid model Creating a mongrel surface and solid models of parts and tools. Correction of imported geometry through special functions for adjusting the surfaces of solid models. Removing unnecessary in terms of processing surfaces with the possibility of splitting the dead ~ on the surface. Interactive selection of elements allows you to with celerity identify areas of processing, technology and automatic selection of elements accelerates the processing of holes. 3-arbor machining and DCG Complementing the basic features Milling functions create and work the surface and solid geometry. A wide range of 3-line of revolution parts, including the actual details of products for all industries, the matrix of molds, inserts, electrodes, plates and in such a manner on. The use of multiple treatment processes to multiple facets of a one only operation with automatic bypass devices. Create a free desperately in 3-axis trajectories of model details with the possibility of processing units and pockets, finishing analogous passes and erasures joints surfaces. Supports NURBS-interpolation for high-make haste processing. It also supports the "smooth" approximation of NURBS-geometry polylines and arcs. The complete range of BCD elements, including management approaches and taps, high notch processing, smooth transitions, rounding the corners. 4 and 5-axis machining Creating a 4-arbor trajectories "wrapped" simple processing on the cylinder, or directly on the image details. The axis of the tool can look at the line of symmetry of the details or to shift the management of its flare of inclination. For the most complex cases, treatment is a value derived of simultaneous 5-axis machining with the total exclusion of be inconsistent of material with the tool and the patron and support of everything types of tools (end mills, rounded, spherical, tapered, ball). Multifunction Machines Creation of optimal programs as being multi-functional machines with multiple slides or groups of tools and spindles. Graphic filament synchronization tasks and simple synchronization of operations for several groups of instruments. Programming spindle, tool traps, rear attendants and other controlled mechanisms. Supports automatic longitudinal meander (Swiss-type). Available postprocessors guarantee a perfect program. Simulation of the supernatural agency Check complex movements of the tool on a machine model to move sure that the tool does not conflict with devices of organization and the workpiece, before the completion of the program in the work~ allows you to avoid costly mistakes. Communicating with CAD-systems Reading facts from all common CAD-systems with a rich set of form exchange process. Supported file formats DXF / DWG, ACIS SAT, Parasolid, VDA-FS, STEP AP203 and 214, in the same manner with well as direct reading of files, Autodesk Inventor, CATIA V4 and V5, KeyCreator, Pro / ENGINEER Wildfire, Rhinoceros, Solid Edge, SolidWorks. There are added to the connected view, Mechanical Desktop, Inventor, KeyCreator, Rhinoceros, Solid Edge and SolidWorks for the in the order of the signs transfer model in GibbsCAM. Postprocessor Create your own post-processor based forward the model supplied templates. To the maximum levels of complexity and optimization be able to select post-processor that works on the ideology of "what I notice, then, and treated" (WYSIWYM - "what-you-see-is-what-you-instrument") from a library containing more than 7000 designed for different combinations of machine / stand postprocessors. Library postprocessors can be further refined in the knowledge of any specific requirements. To use the old systems of establish-processing is the output format APT (or CL-data). Programming at the organization The system of Gibbs SFP (from the Shop Floor Programming - Programming the machinery tool), designed for use in control stands, based on personal computers. Graphical user interface offers one efficient basic features of programming directly on the rack machine as antidote to the rapid creation and modification programs. Gibbs SFP is fully compatible with all modules GibbsCAM, which provides data transmission of any difficulty betwixt the shop and programming department. Gibbs SFP chosen by many most important manufacturers of machines and racks, which makes the company Gibbs and Associates a ruling provider of craft programming systems. Extensions of third-party and habit Functional GibbsCAM can be expanded using a simple macro programming. You have power to also use the development of third-party companies to support more features, such as stanochnoorientirovannoe programming, performance measurement, work with equipment Renishaw. Year: 2010 Version: 9.5.1 Developer: Gibbs & Associates Bit: x32/x64 Compatibility through Vista: complete Compatible with Windows 7: full Language: Multilingual

[b]Download

Download GibbsCam 2010 9.5.1 Multilingual (x32/x64) + Contents - Lz0.. (Rapidshare):

http://rapidshare.com/files/262506192/GibbsCam.2010.9.5.1.Multilingual.(x32/x64).+.Contents.-.Lz0...part_1.zip
http://rapidshare.com/files/262589441/GibbsCam.2010.9.5.1.Multilingual.(x32/x64).+.Contents.-.Lz0...part_2.zip